COLLIMATORS
Type K MD with Micrometer
Collimators with double micrometers allow the setting of defined image angles in two directions.
The movement of the reticle in x- and y- direction in the focal plane is measured with measuring drums. The scale division is five (5) micrometers.
TYPE K MD
Notes on ordering:
When considering placing an order please note the following:
One reticle and bulb illumination (6V/5W, without transformer) are included in the delivery.
Transformer or other illuminations (LED- or light conductive fiber illumination) must be ordered separately. Please specify the reticle type when ordering!
If not specified otherwise, the collimator is adjusted to infinity at 546 nm wavelength. Adjustment to other distances or wavelengths is also possible on demand. It is possible to specify the collimator either with the article no. or/and with the article description.
The nomenclature of the collimators with double micrometer is shown in the right hand graphic.
TYPE K MD
Small Size Apertures
TYPE K MD
Mid-Size Apertures
Note: The technical dimensions of each collimator can be opened by clicking on the description and viewed, downloaded and printed as a PDF.
Note: The technical dimensions of each collimator can be opened by clicking on the description and downloaded as a PDF.
*SD (scale division) = corresponding angle value in arcsec of one scale division of the micrometer screw
** Compact design
Note: The technical dimensions of each collimator can be opened by clicking on the description and viewed, downloaded and printed as a PDF.
*SD (scale division) = corresponding angle value in arcsec of one scale division of the micrometer screw
TYPE K MD
Large Size Apertures
Note: The technical dimensions of each collimator can be opened by clicking on the description and viewed, downloaded and printed as a PDF.
*SD (scale division) = corresponding angle value in arcsec of one scale division of the micrometer screw